User's Manual

TAMPER SWITCH
parts
• 1 - reader
• 1 - Installation Manual
• 4 - #8 Philips self taping screws
• 4 - #8 Spanner security screws
OPTIONAL FEATURES
5
• Open Collector Output - controls an external device operating in
Host Mode only. See iCLASS Application Note for details.
• Configuration Options - Configure LED, Speaker, and other
features. See How To Order Guide or iCLASS Application Note
for details.
• Hold Input - when asserted, this line either buffers a card or disables
a card read until released, as configured.
PARTS
6
installation
HID Corporation
9292 Jeronimo Road
Irvine, California
92618-1905 USA
tel:
[phone]
U.S. [phone]
fax:
[phone]
email:
[e-mail]
www.hidcorp.com
6090-900 Rev. A.3
R90 • Long Range Reader
4
An on board tamper switch is wired
through the “I’m Alive” feature and if
active, the standard supervisory signal
will stop if the cover is removed.