User Manual

Chapter 2- Enterprise Installation

Select this option if you would like both a Client and Server

installation on this workstation. This option will install the

that is being installed locally for this 'server'. You should

have a Base Unit attached at this point if you select this

option.

Application Files

Select this option to install the AIR ID application files on

this server. This component is necessary to perform

administrative functions from this workstation. It is not

required that you install these files on this machine as the

database may be accessed by the AIR ID application files

residing on any machine on the network. However, it is

recommended as you may want to do some preliminary

setup of the database before any Clients are installed.

Database Files

If you are upgrading from a previous version of AIR ID and

you would like to keep your existing database of users,

make sure you deselect the Database Files checkbox. If

your database files are from version 2.4 or below then you

must be sure to select the Database Files checkbox so that

these file will be replaced since the version 2.4 and below

format is not compatible with AIR ID Version 2.5 and above.

Your database of users is maintained in the file ‘AIR

IDss.RFI’. Note that a backup will be made to the AIR

IDss.BAK file. After completing the installation of the

upgrade, you may copy this backup file over to the original

(AIR IDss.RFI). This will restore all previous users. Again

this assumes the database files are of a compatible version.

Service Files

The Service Files checkbox must be selected for the

Server installation.

Press Next to proceed to the next screen.