User Manual

Base Unit Dialog Tab 20
HID Corp.
entry of program options and more detailed options for the
application. These options are described in the next section.
Base Unit Dialog Tab
The Base Unit tab allows all Base Unit options to be set. The
Range and sensing options are greyed out since these apply to
only the active card/reader solutions. The COM Port setting, WAIT
times, and version described in detail in this section.
Base Unit Com Port
Before adding user(s) and badge(s) to the system, set the Base
Unit parameters (if not already set) by typing the Com Port number
which the AIR ID Base Unit is attached: 1 for COM1, 2 for COM2
etc.
If you experience problems with the COM port setting you may
need to check:
1. The port is not overtaken by software such as Palm Pilot’s
Hot Sync, or
2. The Base Unit is powered up (mouse/keyboard
connection) and attached to correct the COM Port
connection.