User Manual

Software Setup 18
HID Corp.
AIR ID Startup Screen (First Time Users)
If this is your first time running the application, or you have chosen
not to disable the Startup Screen, you will see the AIR ID Startup
Screen. This screen is intended for first time users.
Step 1 - Enter the COM Port on which the AIR ID base unit is
attached. This function will test the communication with the base
unit. If the AIR ID software cannot communicate with the base unit,
an error message will be displayed. If an error occurs, check that
the Base Unit is properly attached to the system and the correct
port number is being used.
Step 2 – DB Location – This location specifies where the AIR ID
software will retrieve the required database information. If you are
using the enterprise option and have centrally located the
database, use the file dialog box to select the centrally located file,
else the system will default to the database located on the client
machine.