Install Manual

_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL [phone] [phone] FAX [phone]
Web page, E-mail - www.hidcorp.com - IQ Card Reader Installation Manual 6055-910 Rev A Page
4
of
5
power supply.
• For installation in 15 EU countries, see addendum
(dwg #6055-911) for additional installation
instructions.
then red once.
• Present an ID card to the reader. The LED will
momentarily turn green while the beeper beeps once,
indicating that the card was read successfully.
Important Product Specifications
Power requirements (linear supply)
Operating Voltage Range 9.0 – 14.0 VDC
Absolute Maximum Voltage 16 VDC
Average Current at 12V 100 ma
Maximum cable distance 500 ft Wieg or C/D
To host 50 ft RS-232
FCC Compliance Statement:
This device complies with
part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept
any interference received, including interference that
may cause undesired operation.