Installation Manual

HID Corporation 9292 Jeronimo Road Irvine, CA 92618 USA TEL [phone] [phone] FAX [phone]
Web page, E-mail - www.prox.com AMR100 Property Pass Reader Installation Manual 6015-900 REV A 6 of 6
Power Supply
1. The AMR100 Property Pass Reader can be operated over the full range of 12VDC to ±
1.2V. A linear supply is recommended.
2. After the Reader and power supply are wired together, apply power to the reader.
Cover Installation
1. Place the top cover onto the base of the AMR100 Reader.
2. Secure the cover to the base. Use the flathead screw provided. The location of the top cover screw is indicated on
Figure 1.
2. Place the HID label over the screw.