User's Manual

HID CORPORATION

1. Install the SD Card containing the DCD Application

into the Palm Expansion Card Slot.

2. Touch the Data Collection icon on the PDA screen.

3. The program will start, displaying three menu

options: Retrieve, Files, and Settings

4. Click on Settings to be sure the following parameters

are selected:

a. Comm Method – Ir Channel 2

b. Comm Speed – 19200

c. Protocol – Printer

d. Timeout (Seconds) - 30

5. To download data from the EntryProx Unit to the

Palm:

a. Place the Palm IR receiver within 1/2” of the

EntryProx IR LED

b. Enter the required command sequence at the

EntryProx keypad

c. Quickly touch Retrieve on the PDA screen.

6. Be sure to have the Palm and the EntryProx in

position and ready before starting a download: if the

Palm is not ready, the EntryProx may finish

downloading data before the Palm is able to receive it;

or if the EntryProx is not ready, the Palm may time

out before the EntryProx transmits data.

7. Command sequences are described in detail in the

following sections.

SELECTING TRANSACTION LOG INFORMATION

You can selectively program specific transaction events to be

included (or not) on the Transaction Log. By “masking” out

certain events, you direct the unit not to save those events in

memory and thus they do not appear in the log. The factory

default is for all transaction events to be saved in memory

and included in the log. The procedure follows:

1. Place the EntryProx unit in program mode. Press:

99 # Master Code * (default is 1234)