User's Manual

ENTRYPROX – 4045-907 REV A
36
1. Place the EntryProx unit in program mode. Press:
99 # Master Code * (default is 1234)
2. Press:
46 # 00000 # 00000 # **
3. Press * to exit program mode.
TURNING KEYPRESS AUDIBLE
FEEDBACK ON/OFF
The Keypress Audible Feedback command enables the
sounder to beep once for each key press. This feature
provides an audible acknowledgment that a particular key was
pressed hard enough for the unit to understand. The factory-
shipped default setting is ON, but it can be toggled ON and
OFF as desired using command 30
.
1. Place the EntryProx unit in program mode. Press:
99 # Master Code * (default is 1234)
2. To enable this feature, press:
30 # 0 # 1 # **
3. To disable this feature, press:
30 # 0 # 0 # **
4. Press * to exit program mode.
TURNING KEYPRESS VISUAL FEEDBACK ON/OFF
The keypress visual feedback feature lights the LED once for
each key press. This feature provides a visual
acknowledgment that a particular key was pressed hard
enough for the unit to understand. The factory-shipped
default setting is ON, but it can be toggled ON and OFF as
desired.
1. Place the EntryProx unit in program mode. Press:
99 # Master Code * (default is 1234)
2. To enable this feature, press:
30 # 1 # 1 # **
3. To disable this feature, press:
30 # 1 # 0 # **
4. Press * to exit program mode.