User's Manual

HID CORPORATION

The Invalid PIN Lockout function disables all keypad PIN

entries with the exception of the [ 99 # Master Code* ]

sequence for the duration of the lockout.

To clear an active timed Invalid PIN Lockout:

• disconnect power to the system

• present a valid prox card programmed as “Card Only” or

“Card OR Code”

• Enter the [ 99 # Master Code * ] sequence

Note that if an invalid [ 99# Master Code* ] is entered as part

of the sequence to clear the IPL, a good [99# Master Code* ]

sequence will not cancel the current lockout.

RESETTING THE MASTER CODE AND

SYSTEM DEFAULTS ONLY

Command 40 erases everything from the EntryProx memory

except the user list and transaction log and restores the

default settings. This is useful if the EntryProx unit has

experienced programming problems, or if you wish to delete

earlier programming.

1. Place the EntryProx unit in program mode. Press:

99 # Master Code * (default is 1234)

2. Press:

40 # 00000 # 00000 # **

3. Press * to exit program mode.

ERASING ENTIRE MEMORY / RESETTING

SYSTEM DEFAULTS

Command 46 deletes everything from the EntryProx memory

including the user list but not the transaction log and

restores the default settings. This is used as a last resort if you

need to erase a specific user and could not retrieve the

Programmed User List.