User's Manual
Table Of Contents
- Product Introduction
- Introductions to Receiver
- Elementary Operation
- Static Collection and Data Transmission
- Technical Parameters
- Socket and Main Accessories
- Annexed Table 1 Instructions of Indicator Lights in Control Panel
Annexed Table 2
The display status of indicator under different setting modes:
1. Work mode (double click Fn key to enter into the pattern of work mode
setting; choose the mode after clicking Fn key; press power key to confirm; it
will automatically confirm if the power key is not pressed for exceeding 10
seconds;) ●on; ○off
Annexed Table 2.2 Display status of indicator under work mode
Mode
Satellite lamp
(single green)
Signal light (green light in
double lights)
Base ● ○
Rover ○ ●
Static ● ●
2. Data link (long press Fn key to enter into data link setting mode; choose the
mode after clicking Fn key; press power key to confirm; it will automatically
confirm if the power key is not pressed for exceeding 10 seconds;) ● on; ○ off
Alwa
ys on
The data link equip
ment used in rover or base is unable to
communicate. The communication module is in failure
without data output.
Satellite
light
(Green)
Alwa
ys on
Locked satellites
Slow
flashi
ng
Satellite search or satellite losing lock
Quic
k
flashi
ng
Repo
rt the number of satellite once every minute upon
locking the satellite
Alwa
ys off
1. Upon resetting receiver, the motherboard is in failure
without data output.
2. Under static mode, the motherboard is in failure without
data output.
54