User's Manual
Table Of Contents
- Product Introduction
- Introductions to Receiver
- Elementary Operation
- Static Collection and Data Transmission
- Technical Parameters
- Socket and Main Accessories
- Annexed Table 1 Instructions of Indicator Lights in Control Panel
V60 GNSS RTK System Operation Instruction
GNSS Part
◇ GPS: synchronously track L1 C/A, L2E, L2C, L5
◇ BDS: synchronously track B1, B2
◇ GLONASS: synchronously track L1 C/A, L1 P, L2
C/A (only limited to GLONASS M) and L2P
◇ SBAS, WASS, MSAS, ENGOS
◇ GALILEO:( upgrade reserved)
◇ Initial time is less than 10 seconds
◇ Initial reliability: >99.9%
◇ 1Hz, 2Hz, 5Hz, 10Hz, 20Hz and 50Hz navigation
output
◇ Difference format supports: sCMRx, CMR, CMR+,
RTCM 2.1, 2.2, 2.3, 3.0, 3.1, 3.2
◇ Navigation output format: ASCII: NMEA-0183 GSV,
AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA,
GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS,
GBS
Receiver Precision
◇ Accuracy of static mode and fast static mode:
Horizontal: ±(2.5+0.5×10-6D) mm
Vertical: ± (5+0.5×10-6D) mm
◇ RTK navigation accuracy: Horizontal: ±(8+1×10-6D)
mm
47