User's Manual
Table Of Contents
- Product Introduction
- Introductions to Receiver
- Elementary Operation
- Static Collection and Data Transmission
- Technical Parameters
- Socket and Main Accessories
- Annexed Table 1 Instructions of Indicator Lights in Control Panel
V60 GNSS RTK System Operation Instruction
◇ The height from measurement line of instrument to
phase center of antenna is 39.3mm.
Figure 4-1
4. Record the point name, instrument SN, height and initial
observation time.
5. Start up and set the receiver as static mode. Flashing
satellite light indicates that it is searching the satellite. If the
satellite light turns to long-light state from flashing state, it
indicates that the satellite is locked. The state light will be
flashing according to sampling interval. One time of flashing
indicates one epoch is collected.
6. Shut down after finishing measurement and record
shutdown time.
Measuring position of
antenna height (lower
edge of embossing
position)
41