User's Manual
Table Of Contents
- Product Introduction
- Introductions to Receiver
- Elementary Operation
- Static Collection and Data Transmission
- Technical Parameters
- Socket and Main Accessories
- Annexed Table 1 Instructions of Indicator Lights in Control Panel
V60 GNSS RTK System Operation Instruction
Firmware
The receiver can upgrade firmware through USB drive.
Upgrade steps of firmware:
Figure 3-17
1. Firstly, it shall open the receiver and use Y-type data line to
connect with USB port of computer. Open “my computer”, and
“update” disk will appear.
2. Copy the firmware (the firmware can be downloaded from
official website) to “update” disk; remove U disk, pull up Y line
and restart the receiver.
3. During restarting process, it will have voice prompts in case of
failure or success. In case of failure in updating, please update
again or contact with technicians.
37