User's Manual

V60 GNSS RTK System Operation Instruction
Reset
receiver
Super long Fn
key press
Reset motherboard If the handbook Bluetooth fails to
connect with the host after resetting the host, it can
adjust the host in static mode and then reset after data
collection.
Start and Stop Receiver
Table 3.5 Description of display state of indicator under startup and shutdown
mode
Boot-s
trap
Press the
power
button for
1 second
All indicator
lights on
S
tarting music, work mode before
previous startup and Voice prompt of data
link mode
Shutdo
wn
Long
press
power
button for
3 seconds
All indicator
lights off
Shutdown music
The display state of indicator under different setting modes is
different. See appendix 3: description of indicators on control
panel.
SIM card/USIM Card
The receiver uses online data link mode to operate RTK; it is
necessary to prepare online communication card and open the
relevant data communication business. The card quantity
demanded is set according to the configuration of RTK
29