User's Manual

V60 GNSS RTK System Operation Instruction
Figure 3-7
Notes:
1. Only when liquid crystal displays initial interface or state
information, can the equipment terminal software be connected
with host through serial port/Bluetooth. When liquid crystal
interface is in mode parameter setting interface, the terminal is
unable to connect with the host. It is necessary to wait for liquid
crystal operation and return to previous menu.
2. As for GSM data link parameter setting interface, the panel can
be effective only setting Hi-Target server IP: 202.96.185.34, port:
9000, group number (7 bits), team number (3 bits); if connected by
CORS, parameter setting shall be operated through Hi-Target
handbook software.
3. During the process of static data collection, it is effective to set
parameters (elevation angle, sampling interval). The successful
parameters will be effective upon restarting static collection.
4. If the keys are not operated exceeding 50 seconds under LCD
state, the LCD will close automatically and the system will enter
Cursor skips one
place downwards
Cursor skips one place upwards
27