User's Manual
Table Of Contents
- Product Introduction
- Introductions to Receiver
- Elementary Operation
- Static Collection and Data Transmission
- Technical Parameters
- Socket and Main Accessories
- Annexed Table 1 Instructions of Indicator Lights in Control Panel
V60 GNSS RTK System Operation Instruction
Power Supply
Battery cover plate installation and removal
Installation: obliquely insert the two raised areas on battery cover
plate into the slot; press downwards and fasten the battery cover
upon the sound of “bang”; place the pushing and dialing key in
locking status.
Removal: move the pushing and dialing key to deblocking status;
the battery cover will be popped automatically and opened.
Figure 3-1
Battery installation and removal
Installation: 1. Align “open” side at battery slot with vibrating
needle power socket .
2. Lightly push in towards “close” side (as shown by red
arrow) to install battery.
Unlock state
L
ock state
17