User's Manual
Table Of Contents
- Product Introduction
- Introductions to Receiver
- Elementary Operation
- Static Collection and Data Transmission
- Technical Parameters
- Socket and Main Accessories
- Annexed Table 1 Instructions of Indicator Lights in Control Panel
V60 GNSS RTK System Operation Instruction
◇ Connecting screw: it is used to fasten the instrument
to base or centering rod
◇ Battery slot: it is used to place lithium battery
◇ Vibrating needle power socket: it is used to connect
the lithium battery and host
◇ SIM card slot: when communicating with GSM data,
it is used to place SIM card.
◇ SD card slot: it is used to place SD card, which can
store massive static data.
◇ Trumpet: timely operate the instrument and
broadcast the status with voice
◇ Protection plug: it is used to prevent dust in interface
Note: 1. If it is unnecessary to use five-core socket,
eight-core socket and difference antenna
interface, please cover the rubber plug to
prevent dust.
2. In case of inflowing, the trumpet may be
silent or hoarse, which will recover
normally after drying.
Five-core and Eight-core Sockets
Figure 2-4
11