User's Manual

Config File
Figure 4-9
Warning
： When the config file has been saved, you can apply
it to a receiver. But you should do an average for
the receiver which work in base mode before
starting a RTK surveying.
When your base is working in external readio mode, software
will prompt you to input the channel of the external radio after
you have save the configuration.
Save the current
configuration of the
receiver
Load the saved
configuration of
the receiver
Offer you 4 files
to save and load
configuration
You can share your
files by copying
them to other
controller’s ”CfgFil
e” folder.
Switch the work
mode when apply
the configuration