User's Manual

Static and Data Transmission
1.Matching the side of battery with of the charger, put it as
the Figure 4-11 shows.
Figure 3-14
2.Slide battery towards “Close” side (as the above arrow direction) until
battery is locked
3.After connecting charger with power supply, the “Charging” led becomes
red.
Warning: 1. Battery can only be charged by charger furnished
by Hi-Target. Do not throw it into fire nor touch
with things that will lead to short circuit fault.
2.If battery is heating, leaking, deformed or smelly at
work, charge or being stored, stop and change
another one at once.
3.If the endurance is much shorter than it was before,
change another one.
Close