User's Manual

Static and Data Transmission
Uninstall:
Slide the battery towards to the “Open” side, and then pull out battery.
Figure 3-12
 iRTK Receiver Battery Name and Model
Name Model
5000mAh lithium battery BL-5000
iRTK lithium battery
charger
CL-4400
 Power Supply Mode
Mode
1. lithium battery;
2. 8-pan port and 5-pin port on the mainframe
for external power supplier
Power
Supply
Range DC 6V~30V
iRTK receiver can get power by external supplier by 8-pin or 5-pin port on the
mainframe. When using the GSM or UHF communication mode, the external
power supply should be 6~36V and current should be more than 500mA.
When it is connected to both power suppliers(external and battery), receiver
will adopt the one with a higher voltage. To avoid any destroy to the receiver,
make sure that your engaged external power supplier should be the one
furnished by Hi-target.