User's Manual

Voice assist
In any mode, double-click power key, it can open voice assist to help the user
accomplish your operation.
Reset receiver
Super long press the F1, single click the F1 to self inspection, single click F2 to
reset motherboard, it takes you 1 minutes to reset motherboard, after reset there
will be voice prompt.
Back to factory setting
Super long press F2, single click F2 to original parameter Settings, each module
will automatically diagnosis and recovery. Details please refer to appendix 4: iRTK
parameters.
Formatting receiver
When you want to format iRTK receiver, use Y data cable to connect with
computer , run the GPS receiver management software, choose a serial port and
open the serial port, when instrument get connection, the serial number will be
displayed in the bottom of the software interface, click "format/ delete all" to
complete the receiver's formatting, all data are deleted, unable to recover.
Figure
Warning: Before formatting iRTK receiver , make sure that
useful data in the receiver have been copied to the computer,
once deleted or formated,it will never recover!