User's Manual

Static and Data Transmission
2 The data which receiver upload is a static data files (only support * . GNS format
data to upload).
3. When static data file is bigger than 3M, we do not suggest you to use network to
upload so as not to affect the running speed of server ,also affect your work
efficiency.
4. Before uploading ,if the receiver shutdown ,or the 3G card can not offer network
service normally ,all the files will be uploaded unsuccessfully and you can never
upload this f ile!
Set receiver password
Connect the PC with Y data cable, run the HI-TARGET serial receiver management
software,choose the right port and connect it,after connection,set remote
connection password and remember it.
Figure3-4
Note: 1. Before using this function,you need to insert the 3
G SI M card which is available to network , register on the
LBS server before uploading the data.
Note: 1. We suggest you immediately set the password
after you buy it,when you use the remote
connection ,remember your password to guard against
theft intelligently.
2. If you forgot the password, you can set it to original
state to get your password.