User's Manual

Static and Data Transmission
Colle
ction
interv
al
Long
press F2
Single press F2 to set collection interval to be
1s,5s,10s,15s
Stop
and
go
Double
click F2
Double click F2 to start or stop record（only when
you start the "stop and go ",this operation works
Confirm setting Single
press
power
button
Than the receiver will speak out its current work
mode,
data link, radio transmit power, channel; meanwhile
the
power led will flash to hints its power status
Auto-set base F1+Pow
er
button to
turn on
receiver
Press F1 while than press power button at th same
time
to turn on the receiver until hearing “ Dingdong” .
Then
the receiver speak out its current status.
Single press F1 to self inspection
Reset receiver
and self
inspection
Supper
long
press F1
Single press F2 to reset the motherboard
Single pressing F1 to upload static file
Upload static
file and come
back to original
settings
Supper
long
pressing
F2
Single pressing F2 to come back to original setting
Turn on
Press
power
button
for 1s
In shutdown state，long press power button for 1s，
relax the button after all the LED flash
po
we
rbu
tto
n
Turn off
Long
press
power
button
In turning on state，long press power button for3s，
then it will shutdown