User's Manual

Super long
pressing
Pressing button more than 6 seconds,until you
heard the sound of "dingdong".
Long press
F1+power
button to turn
on receiver
Hold F1+power button,until you hear the sound
of "dingdong"
Slow flash of
led
Flashing interval more than 0.5 second
Fast flash of
led
Flashing interval less than 0.3 second
Button functions
Table3.2 Button function introduction
function Button
operatio
ns
introduction
Working mode Double
click F1
Than single click F1 to choose the receiver work
mode
between “ base” , “ rover” , “ static”
Data link Double
click F2
Than single click F2 to choose the data link between
“ External”
power Long
press F1
Then single click F1 to set the transmit power to be
high,
UHF
mode
Chan
nel
Long
press F2
Than single click F1 to choose channel by minus 1;
or you can long pressing F1 to choose channel by
minus 10;or single click F2 to choose channel by
plus 1; or you can long pressing F2 to choose
channel by plus 10
Static Eleva
tion
angle
lLong
press F1
Single press F1 to set elevation angle to be 5
degrees,10 degrees, or 15 degrees