User's Manual
V100GNSSRTKSystemUserManual
23
shall be measured to the center point mark stone on top
of the instrument of measurement reference
member.V100 receiver measuring reference member
radius 0.130m.
Figure 3-7
3. Record point name, instrument number, instrument
height, beginning observing time.
4. Boot, set the host to the static measurement mode.
Satellite light flashing indicates it is searching for
satellites. Satellite light turn to long-term lighting from
the flashing status indicates locked satellites. In static
mode, signal light (red) flashes once based to setting
measurement reference
height measurement point