User's Manual

Product introduction
Qstar series high precision mobile GIS products are equipped with complete navigation and
position function and GIS data acquisition function, with the operating mode of physical
buttons and touch screen, inputting in both Chinese and English are supported. It is designed
as industrial standard, and can be dropped from 1.5 meters high to the cement floor without
anything, equipped with IP67 level dustproof and waterproof, it can adapt to complex work
environment in the field. At the same time, the configuration of the large capacity of lithium
battery can meet the requirements of all day work.
Qstar series high precision mobile GIS products are integrated designed, and it is equipped
with functions such as GPS, embedded Windows Mobile 6.5 system, digital camera,
microphone, bluetooth communication, large storage, USB port, SD card expansion ,etc.
Product features
◊ Industrial integration design, with a variety of functions
◊ Can be used as the industrial three proof standard GPS navigation
◊ The built-in digital camera, which can realize image information site acquisition,
automatically realize GPS coordinates and image information matching labeling
◊ The built-in microphone, it can realize voice information site collected with the function
of speech play
◊ The built-in bluetooth , to realize the wireless data transmission
Use and the matters needing attention
Although Qstar series high precision mobile GIS products use the corrosion resistance and
impact resistance materials, but the instrument still need our careful use and maintenance,
and keep it in dry environment as far as possible. In order to improve the stability of the Qstar
series high precision mobile GIS products and use cycle, please avoid Qstar series high
precision mobile GIS products exposed to extreme environments,such as: damp, high
temperature, low temperature, corrosive gas or liquid, etc.
To ensure continuous observation of the satellite and satellite signal quality, the stations
should be set over the open place as far as possible, barriers are not permitted in more than
15 degree; To reduce the interference of electromagnetic wave to GNSS satellite signal,
within 200 m strong electromagnetic interference is not permitted, such as TV tower,
microwave station, high voltage transmission line; To avoid or reduce the happening of the
multipath effect, stations should be far away from to the terrain which reflect electromagnetic
wave signal strongly, such as high building, sliced waters, etc.
Warning: Qstar series high precision mobile GIS products must be
preserved and used within stipulated temperature range. Detail
requirements, please refer to chapter 4: technical parameters.