User's Manual

Table 3-1 Qstar series high precision mobile GIS product battery, charger model
name model
8800 mAh lithium batteries BL-8800A
Lithium battery charger CL-00A
◊charge
When charging, the charger should be specialized charger with standard configuration or seat
charger in certain temperature range, and charging time should achieve a certain
requirements.The concrete use method and requirements: charging with standard
configuration is demanded when charging the Qstar series high precision mobile GIS product,
charge in 10 ℃ ~ 40 ℃ temperature range. Using for the first time in general, there should be
some battery power, you should use up the inside electricity before charging again, the first
three charging must achieve12 hours, after that charging 6 hours. If the battery is not often in
use, it must be charged once a month.
Switch machine operation
◊Boot
In the shutdown state, long press three seconds, it will boot.
Warning: 1The battery and charger manufacturer configuration are only
permitted, do not put it into the fire or metal electrodes with short circuit.
2 If you find the battery has fever, deformation, discharge, smell or other
abnormal phenomenon when the battery is in use , in charge or in storage, please
replace new battery.
3 If the use time of the battery significantly shortened, please stop using the
battery, the battery is aging, please replace new battery.