User's Manual

“ESC”exit button: short press it on boot-up state, means to cancel or exit the current window
operation.
“ENT”Confirm button: ok button.
Switch machine button/backlight control button: long press it for more than 3 seconds to
turns on/off it. On boot-up state, hold the button for 1 second, switch on or off the backlight .
Navigation button: move the cursor, to choice the options content.
MicroSD card
Can be used for storage of the collected data and program files. Program installation package
can be installed to program MicroSD card, just as installed in system disk space.
Power supply system
◊The battery installation and removal
Install the battery, contact the battery with a metal connector on one end with Qstar series
high precision mobile GIS product battery jar copper point, and screw up the screw.
Take out the battery, take out the screw firstly, the battery will popup little, then you can take it
out.
◊ Qstar series high precision mobile GIS product battery, charger model number
Notice: when Qstar series high precision mobile GIS product is not in work
temporarily, please close a backlight to save electricity, to extend industrial
GIS data collector work time.
Note: the MicroSD cards (also named TF card) are small volume external flash
memory storage expansion CARDS, usually used in mobile phone, PDA, users
should distinguish it between the common SD card. The volume of ordinary SD card
are larger than the MicroSD card, not suitable for Qstar series high precision mobile
GIS product. Qstar series high precision mobile GIS product can support 32 GB
MicroSD card at most for present.