User's Manual

If use external power supply for A10 by the eight-pin port and

five-pin port on the mainframe, the power supply should be 6～36V with

current no less than 500 mAh.

When using both lithium battery and external battery, the receiver

will check the power pressure of both batteries and choose the higher one.

And please note that if use external power supply, must use the

specified external power supply from to avoid any destroy to the receiver.

Note: usually one A10 lithium battery can last 13 hours

for static. But the working time will be

decreased along with the more and more

charging times or in very low temperature.

 Battery charging

BL-5000 lithium battery must be charged in specified CL-8410

charger for about 7.5 hours. The indicator led of the charger will be in red

while charging, and then green when charging finished.

Warning: 1. Only using specified charger and do not put the

battery into fire nor make it short circuit.

2. If heating, deformed, leaking, bad smells happens

while charging, using or storing, please stop using

the battery right now and change another one.

3. If the working time obviously become very short,

please stop using the battery right now and change

another one.