User's Manual

5. RTK Data Storage
The controller can be connected with the receiver via Bluetooth or
cable, the data will be stored in the memory of the controller.
After fieldwork finished, you can connect the controller with PC by
the data cable, and then download the RTK data from the controller to PC
by copying.
6. Self-inspect and reset Receiver
Long press F1 button for more than 6 seconds, and then single press
F1 to self-inspect or single press F2 to reset the mother board.
Warning: reset receiver will make the next tracking satellite
time longer while needs users to set receiver work
mode again.
7. Format Receiver
Format A10 receiver by Receiver Management Software:
 Connect A10 with PC by serial port of GC-3 cable
 Turn on A10 receiver
 Choose right serial port and open port
 After connecting successfully: the S/N will be showed in the below
 Click “Format/Delete All” to complete format receiver. After this
operation, all current data will be deleted forever.
23