User's Manual

Fast flash

Error in static mode (typically for no more flash

memory)

Always on

Communication module in error for getting data,

mainly resulted by problem in module so that no

data output

Satellite led

(green)

Always on More than 4 satellites tracked successfully

Slo w flash Loss satellites and try re-tracking

Off

1. mother board error resulting in no data output

while resetting receiver

2. mother board error resulting in no data output

while in static mode

4. Static Data Storage

The GNSS static data collected by A10 receiver will be stored in its

memory or the SD card, in *.GNS format.

You can connect the A10 receiver with PC by USB port of GC-3

cable and then just copy the static data into your PC.

Note: in case of no more memory, the data led (the middle

led) will be fast flashing while stopping the current

static data collection.