User's Manual

the power led will flash to hints its
power status
Auto-set base
F1+Power
button to turn
receiver
Press F1 while than press power
buttonat the same time to turn on the
receiver until hearing “Dingdong”.
Then the receiver sp
eak out its
current status.
Reset receiver and
selfinspection
Long press F1
Single press F1 to selfinspection.
Single press F2 to reset the mother
board.
Back receiver to
original settings
Long press F2
Single press F2, it will automatically
rectify, correct and reset to the original
settings.
Check currect
work status
Single click
power button in
non-settings
status
The receiver will speak out the work
mode and data link, at the same time
the power led flashing times hints the
power status.
20