User's Manual

4) Dsp: Display. You can select “Normal”, “Slow”,

“[ENT]”,or “FAST”. This parameter can control the

automatic display of the retrieving dialog box .

11.2.4 Unit setting

1) In the setting menu, press [4] or pres [ENT] after

moving the cursor to “Unit” to enter the interface of

“Unit setting”,as shown in picture below:

Unit setting

Dist:

Temp.:

Press:

Angle:

▲

DMS

℃

hPa

2) Angle : you can select “DMS”, “GON”,or “MIL”;

3) Dist.:Distance.you can select “m”, “US-Ft” or “I-Ft”;

4) Temp.: you can select “℃”, or “℉”;

5) Press: Pressure .you can select “hPa”,“mmHg” 、

“inHg”,“mBa”,“Psi”.

11.2.5 Communication setting

1) In the setting menu, press [5] or press [ENT] after

moving the cursor to “Communication ” to enter the

interface of “Communication”, as shown in picture

below:

Communication

Baud:

▲

Port:

Cable

9600

2) Port: there are “Cable” and “B.T.” (this option just for

the instrument which is equipped with blue tooth) to be