User's Manual

Dist. setting

T-P adj:

Sea:

Scale:

C&R adj:

1.000000

▲

OFF

0.14

2) Scale: to input scale, the range is 0.99~1.10.if the scale

beyond the range, the other value can be ignored;

3) T-P adj: you can select “ON” or [OFF];

4) Sea: you can select “ON” or “OFF”;

5) C&R adj: you can select “OFF”, “0.14” or “0.2”;

[Notice *]

T-P adj: the correction of temperature and atmospheric

Sea:the correction of Earth Curvature.

C&R adj: The Correction of the Atmospheric refraction

and the Earth Curvature.

11.2.3 Coordinate setting

1) In the setting menu, press [3] or press [ENT] after

moving the cursor to “Coordinate” to enter the

interface of “Coord:”,as shown in picture below:

Coord：

Order:

Note:

Dsp:

▲

NEZ

XYZ

NORMAL

2) Order: you can select “NEZ” and “ENZ”;

3) Note: when the order is “NEZ”,you can select

“XYZ”,”YXZ”,or “NEZ”;when the order is “ENZ”,you

can select “XYZ”, “YXZ”,or“ENZ”. This parameter

will affect the coordinate title and coordinate display

order;