User's Manual

82
File manager
DEL.
FORMAT
INFO
P1↑
[P1↑]
[P2↓]
★A:130606-1
△A:130606-1
130606-1
130606-2
130606-3
File manager
NEW
LIST
JOB
P2↓
★A:130606-1
△A:130606-1
130606-1
130606-2
130606-3
（2）
2) The files in the selected disk will be list on the display ,and
you can press [▲] or [▼] to move the cursor to select file;
[Notice*]:
The display which behind“★” is the file name of
current working file in the selected disk .
The display which behind“△” is the file name of
current working file which is used to retrieve
coordinate in the selected disk .
3) After pressing [P2↓] , the key name changed to [P1↑] and
turn to the second page, then press [P1↑] ,turn to the first
page;
4) Press [NEW] to enter the interface of “New file”,as shown
in picture below. After input point name, you can press
[ENT] to a create new file, if it exits , a prompt “File exits”
will appear and the back to the file manager interface;
New file
File :
1
5) Press [JOB] to set the selected file as current working file;
6) Pressing [LIST] can set the selected file as current working
file;
7) Press [DEL.] with a prompt “Delete?”. If press [ENT] ,then
delete the selected file and return to file manager interface