User's Manual

78
coordinate file, and the name is “PCOOR.COR”, which stores
the known coordinate data. This function is used to view the
known coordinate data and operate the data.
1) In the data management menu ,press [2] or press [ENT]
after moving the cursor to “View known coord.”,as
shown below:
Known list 1/1
SRH.
ADD
DEL.
CLR.
MP,200
MP,100
MP,201
MP,202
2) Specific operation refers to chapter 10.1 and without
edit function;
3) Press [CLR.] with a prompt “Clear?.If press [ENT],
clear the data of known coordinate file. If press [ESC] ,
return to the data list;
4) Press [ESC] to return to the data management.
10.3 Input known coordinate
This function is to input coordinate data to known
coordinate files.
1) In the data management menu, press [3] or press [ENT]
after moving the cursor to “Input coord. ” to enter the
interface of “Input coord.”, as shown below:
Pt.N:
Code:
Input coord.
101
ROAD
LIST
123.254
362.145
1.258
m
m
m
Z:
E:
N:
1
2) After input the “N”, “E”, “Z”, “Pt.N”, “Code”, press
[ENT] at the code input box with a prompt “Finished”;