User's Manual

74
Target
height
Target point
+SD
1) In the offset menu, press [6] or [ENT] after moving the
cursor to “Offset/SD” to enter the interface of
“Offset/SD->Meas” ,as shown in picture (1);
HR:
VZ:
SD:
*[HOT] to set T.H.
Offset /SD->Meas
MSR1
MSR2
[MSR]
HR:
VZ:
SD:
Offset /SD->Input
+SD:
（2）
*[ENT] record
[ESC]
47°26′11″
82°11′22″
m
m
47°26′11″
82°11′22″
0.260
134.663
（1）
m
1
2) Aim at the prism, and press [MSR1] and [MSR2] to
start measuring. After a successful measurement
completed enter the interface as shown in picture (2);
3) Input the offset “+SD”, and press [ENT] to enter the
recording interface, then the display is angle data,
distance, and coordinate of target point. After a
successful saving,return to the interface of offset menu;
4) Press [ESC] to return to the interface of “Offset
/SD->Meas”.