User's Manual

69
Instrument center
Measured point 2P2
Measured point 1P1
Target point
TGT
Station
Target height
Target height
1) In the offset menu, press [3] or press [ENT] after moving
the cursor to “Offset/2D” to enter the interface of
“Offset/2D->Pt.1” ,as shown in picture (1);
[MSR]
HR:
VZ:
SD:
*Take 1st
（1）
Offset /2D->Pt.1
MSR1
MSR2
HR:
VZ:
SD:
*Take 2st
Offset /2D->Pt.2
MSR1
MSR2
（2）
P1-P2:
P2-TGT:
（3）
Offset /2D->Input
ENT
[MSR] [ESC]
【ESC】
35°34′17″
69°42′11″
m
36°34′17″
69°43′11″
m
3.893
m
m
2) Aim at the measured point 1 and press [MSR1] or
[MSR2] to start measuring. When finish the
measuring, enter the interface as shown in picture
(2);
3) Aim at the measured point 2 and press [MSR1] or
[MSR2] to start measuring. When finish the