User's Manual

Turn the instrument until the “dHR” close to “0°00′00″”，and

you can conduct somebody to put the prism in the view of

telescope until close to the direction of measurement.

1) Aim at the target and press the key [MSR1] or [MSR2]

to measure the target .when the measurement is

completed, the difference value between target point

and staking out point is displayed on the first page.

dHR: the difference value form horizontal angle to

target point;

R/L:Lateral error

F/B: Longitudinal error

U/D:Dig/Fill

2) Press the key [DSP] to switch to the result display of

third page;

3) When the stakeout mode is “S-O ang&dist”, the key 4

will be the key [QUIT], which as shown in picture (1),

and you can press it to return back to the menu of

staking out;

4) When the stakeout mode is “S-O coord.”, the key 4

will be the key [NEXTP],which is for retrieving the

next point of the former point. As shown the picture

(2);

5) When the stakeout mode is “S-O equidist.”, the key 4

will be the key [QUIT],as shown picture (3) . Press

[QUIT] and return to the stakeout menu.