User's Manual

48
[Notice*]: Offset:the horizontal distance from the target
point to its projective point on baseline.
[DSP]
[DSP]
MSR1 QUIT
DSP
MSR2
S-O Line->Result 2/2
m
m
m
E:
N:
Z:
MSR1 QUIT
DSP
MSR2
S-O Line->Result 1/2
m
m
m
*Meas. target
Offset:
HV:
Length:
*Meas. target
5) Aim at the target and press [MSR1] or [MSR2] to
measure .After a successful measurement, the
measured data will be displayed, and the coordinate is
of measured point;
6) Press [DSP] to switch the two pages of the result;
7) Press [QUIT], then return to staking out menu;
8) Press [ENT] to save the measured result.
7.6 The result measurement of the staking out
above.
The interface of “S-O->Result” is as below:
MSR1
DSP
MSR2 MSR1
DSP
MSR2
MSR1
NEXTP
DSP
MSR2
S-O -> Result 1/3
m
R←:
dHR→:
B↓:
m
U↑:
0° 00' 00"
m
S-O -> Result 2/3
VZ:
HR:
SD:
m
HD:
91° 25' 00"
m
90° 25' 43"
S-O -> Result 3/3
m
m
m
m
(1)
(2)
(3)
[DSP]
[DSP]
[DSP]
E:
N:
Z:
VD:
NEXTP
NEXTP