User's Manual

3) Input the height difference in the “HV” input box, and

then press [ENT] or [▼];

4) Input horizontal angle in the “HA” input box;

[Notice*]:

“HD”: the horizontal distance between stakeout point

and station.

“HV”: the height difference between stakeout point

and station.

“HA”: the horizontal angle between stakeout point

and station.

5) Press [ENT] to enter the interface of “SO -> Result

1/3”,please refer to the operation of chapter “7.6”.

7.2 S-O coord.

This function is to stake out according to the coordinates of

staking out point.

1) In the menu of staking out, you can press the key [2] or

press [ENT] after select “S-O coord.” to enter the

interface “S-O coord.-> Input”, which as shown below;

S-O Coord.-> Input

Pt.N:

S-OKNOWN

2) Retrieve the point by reference to the operation of

chapter 4.8,and then the display of “Pt.N” will be

refreshed;

3) Press the key [S-O] to enter the interface of “S-O ->

Result” and see the operation of chapter 7.6.