User's Manual

42
6.6 BS check
This function can be used to check the current horizontal
station and the backsight angle of last stationing, and also reset
backsight height.
1) Press [6] or select “BS check” and press [ENT] to enter
the interface of “BS check”.(as shown below);
ESC RESET
BS check
HA:
BSA:
* BSA reset
41º24′12"
91º42′34"
2) Press [ENT] to come back to stationing menu;
3) Press [ENT] or [RESET] to come back to
“Basic”;interface and reset the current angle as
backsight angle.
6.7 View STN
This function is to check the coordinates, angle, name of
backsight point, station name, instrument height and etc;
1) Press [7] or press [ENT] after select “7.View STN” to
enter the interface of “BS check”.(As shown below)
STN info 1/2
STN:
STN 2/2
I.H:
Z:
m
m
m
E:
N:
-23564.203
-29546.256
-0.300
Z:
m
m
m
E:
N:
-23564.203
-29546.256
-0.300
BS:
BSA:
2
0.300
41º24′12"
m
[DSP]
[DSP]
3
2) Press [DSP] to switch displays. One of interface of
“STN info 1/2” displays the station data, and the other
interface of “STN info 1/2” is the data of backsight;
3) Press the key [ENT] or [ESC] to return to the stationing
menu.