User's Manual

39
（1）
Calculate ?
Yes
NO
[ADD]
【ENT】
[ENT]
（2）
（3）
【ESC】
HR:
HD:
Res.->Meas.
SD:
m
m
*Meas. or [ENT]
MSR1 QUIT
91º42′34"
0.526
0.528
MSR2
Pt.N:
T.H:
RES.->Input <1>
12345
0.300
m
KNOWN QUIT
Res. -> Result 1/2
Z:
m
m
m
E:
N:
*[REC] to save STN
1.123
2.234
3.345
ADD QUITDSPREC.
Res. -> Result 2/2
*[REC] to save STN
ADD QUITDSPREC.
dZ:
m
m
m
dE:
dN:
0.000
0.000
0.000
[DSP]
[DSP]
1
1) Under the menu of stationing, Press [3] or press [ENT] after
selecting “3.Recection” in the interface of “ Res.->Input”
, which as picture (1),then retrieve the point;
2) Retrieve the point (see the chapter 4.8), then the display of
“Pt .N” will be refreshed, at the same time, the cursor moves
to the input box of “I.H” (instrument height);
3) Input target height in the “I.T” in put box and press the key
[ENT] to enter to the interface of “Res.->Meas.”,as shown
above(2);
4) Aim at the target, press the key [MSR1] or [MSR2] to
measure distance and press [ENT] or press [ENT] to
measure angle directly without measuring distance , then
enter the next point input interface;
5) After completing distance measurement of two points or
angle distance, enter to the interface of “Res.->Result”,