User's Manual

“AVG”: The cumulative average values of horizontal

angle.

“Angle”: The real-time angle value between the backsight

point and the foresight point after every repeated measurement.

“Read”: The number of completing angle repetition

“HD”: The horizontal distance value of the foresight point

measured.

2) According to the prompt “Aim BS.”, aim at backsight

point, and then press [ANG];

3) According to the prompt “Aim FS.”, turn the

instrument (the angle is changed in real time),and press

[ANG].After these operations, a angle measurement is

completed , and the values of “SUM”,“ AVG”, “Read”

will refreshed;

4) Repeat the operations of step “1)” and “2)”,but a

maximum of ten angle repetitions is allowed. If you

press [ESC],the operation of this angle repetition will

be canceled and return to the previous operation;

5) You can measure the distance of the foresight point

with the keys [MSR1] or [MSR2] after aim at the

foresight point and press [ANG]. If press [ENT] again,

you can record the measured data;

6) Press [ESC], and the interface will come back to angle

menu.