User's Manual

HR:

Vz:

SD:

Pt.N:

T.H:

Basic 1/3

Pt .N:

T.H:

Basic 3/3

HD:

VD:

Pt .N:

T.H:

Basic 2/3

[DSP]/

[▼]

SD:

[DSP]/

[▼]

[DSP]/

[▼]

[▲]

45º23'53"

89º52'36"

1.680 m

Pt.N: It defaults to the point name which is the last point

name added 1before last shutdown;

T.H: it defaults to the value of target height saved by

system.

Under the basic measurement, the function which can be

completed, as follows:

Measurement

1) You can proceed with angle measurement, distance

measurement, and coordinate measurement;

2) The angle value will be refreshed in real time as

turning the instrument;

3) Press [MSR1] or [MSR2] to measure distance with the

settings of the measurement;

4) Introduction: the distance measurement mode will be

displayed when start to measure distance;

“*C”indicates constant measurement

“*S”indicates single measurement

“*R”indicates average measurement

“*T”indicates track measurement

5) Every successful measurement, the buzzer goes off and