User's Manual

21
5) The interval of pressing the key [1] twice is not over
0.3 seconds .If over,another letter will be input. If
press the key [1] constantly, it will be circular between
“S”  “T”  “U” “1”  “S”. The operation of the
other number keys (“0~9”) is as same as it of the key
[1];
6) Press the key [5] constantly again, “CO” displays in
the edit box;
Input code
CO
Code：
A
7) Press [Mode] to switch to the mode of inputting
numbers. There is a symbol displayed as “1” beside
battery;
8) After press the key [1],the interface is as follows:
Input code
CO1
Code：
A
9) Pressing [◄] can delete the character in the front of
cursor;
10) Pressing [►] can move the cursor circularly. When it
moved to the last, comes back to the first.
● Input numbers
Example 2: Take Inputting target height for example, which
needs to input “1.562” in the edit box.
1) Because the target height can’t be letter, the inputting
mode will default to number “1”, and can’t be