User's Manual

pressing the key [▲] or [▼];

3) Backlight: each time you press the key [Light], the

backlight of display can switch between the brightness (for three

levels) and off circularly;

4）Laser: Each time pressing the key [LASER] can switch

on or off the laser;

5) laser plummet: you can increase the laser plummet

brightness until the brightest by press [＋]，and you can also

press [﹣] to decrease the laser plummet brightness until off it.

3.4 Setting for measurement parameters

You can press the [5] to set the measurement parameters

under all measurement interfaces.

-------Config------

1.[MSR1] Config

2.[MSR2] Config

Reflect:

PSM:

Mode:

Meas Setting-MSR1

Count:

Record:

ENT

▲

Track

▲

Prism

▲

This series total station is equipped two measurement

keys,[MSR1] and [MSR2] and each of them is equipped with

measurement parameters. Whichever you select, you can equip

the measurement parameters under the menu of “Config”

interface. Here,as an example to the key [MSR1]

1) You can press the key [ENT] or [▼] to move the focus down

and also press [▲] to move the focus up when complete to

set one parameter;

2) You can change the options by pressing the key [◄] or [►];

3) After the last setting completed, you can press [ENT] to save

the settings, and return to the last interface;

4) Reflect: you can select “prism”, “NP”(for Non prism