User's Manual

9
press the key [S A], and the data of “Tilt Y” will display zero
by press [DIGIT] when the instrument is equipped with
single-axis compensator;
2）Press [OFF] to close the compensator;
3）Press [S A] to open the compensator of the vertical
direction and close the compensator of the horizontal
direction;
4）Press [D A] to open the compensator of the two
directions.(For the instrument equipped with dual-axis
compensator);
5）Press [DIGIT] to display the value of compensator,
which is real-time refresh, and the button of [DIGIT] is
changed [GRA.] .Press the [GRA.] to return to the graphical
display interface;
6）Press [ENT] or [ESC] to come back to basic
interface.
3.3 Settings of star [★] key.
Except for the menu interface, you can press [★] to enter
the following interface.
Shot cut
Beep：
-
Contrast：
+LASERLIGHT
OF ►
4 ▲ ▼
The settings of star[★] key as below:
1) Switch key for buzzer each time you press the [►]
switch on or off the buzzer circularly;
2) Contrast adjusting: adjust the contrast of display by