User's Manual

110
vertical alignment list, as shown below (left);
SAVE
ADD
DEL.
VIEW
Define(V)-Begin
Pile:
Elv.:
ENT
Length:
1
2) If there is no vertical alignment data, press [ADD] to
enter the interface of “Define (V)-Begin”. After the
input, press [ENT] to continue inputting the vertical
alignment data, and the title of the interface is changed
“Define (V)-XX”. Among them, the “XX” is the line
number ;
3) After input all data, press [ESC] to return to the vertical
alignment list, as shown below, the left is line type and
the right is pile;
4) The other operations are same as them of element
method.
12.4 Staking out Roadway
In this function, the linear files input will be used. You can
select the file you at any moment, so, the staking out of any
mileage can be accomplished. You won’t worry about whether
the limited linear data of alignment file is enough because of this
design. You can divide any road into a few small linear files to
story.
The terms of staking out roadway: