User's Manual

104

12 Roadway

This function is used to manage the road file, input road

data, stake out road, etc.

In the basic interface, press [4] to enter the “program” menu,

then press [9] to enter the interface of “Road ” menu,as shown in

picture below:

----Road-----

1. Road file manager

2. HC list

3. VC list

4. S-O road

△

12.1 Road file manager

There are two type road file,which are horizontal alignment

file and vertical alignment file. Every road implicitly exists with

the same name of two types of files.

1) In the road menu, press [1] press [ENT] after moving

the cursor to “Road file manager” to enter the interface

of road file manager, as shown in picture below. The

list displays the current road file ,which exists in the

Flash disk in the instrument. The “Opened”displays the

current used road file;

OPEN

DEL.

Opened:

NEW

△

DFH

ROAD11

△

2) Pressing [OPEN] can set the selected road file as the

current used road file;

3) Press [NEW] to enter the interface of “New road file”.